Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- Turn the housing half over.
- Remove the bearing from the housing half on the
alternator side using the specified special tool
and remove with a rubber mallet.
Special tool
020376Y Handle for adapter
020358Y Adapter 37 x40 mm
020439Y Guide 17 mm
- The bearing from the housing half on the drive side
Remove with the specified special tool
in.
Special tool
001467Y008 Pliers for removing bearings
Ø 17 mm
001467Y007 Basket for bearings with external
diameter Ø 54 mm
- Before installing a new bearing, the housing must be
outer half alternator side with the indicated
heated using a special tool.
- Place the housing half on a wooden base
only.
Special tool
020151Y hot air gun
- Grease the guide seat and install a new bearing
Attach the specified special tool.
- The new bearing in the housing half with the
Install the specified special tool.
ANNOTATION
IF A BEARING WITH A PLASTIC CAGE IS INSTALLED,
IT MUST BE INSERTED SO THAT THE VISIBLE SIDE
WITH THE BALLS SHOWS TOWARDS THE INSIDE OF
THE HOUSING.
Special tool
020376Y Handle for adapter
020359Y Adapter 42 x 47 mm
020439Y Guide 17 mm
Motor
AGAINST - 205
Advertisement
Table of Contents
