Table of Contents
Advertisement
Machine Translated by Google
Motor
- The closure on the inspection opening for the
phase adjustment of the valve control and the oil in
Filler plug/dipstick for the engine oil provisionally
attach correctly.
- The blow-by line with a new O-ring
insert.
- The screw with the specified rotation
tighten moment.
Torque guide values (N*m)
Fastening screws for the blow-by line
3 - 4
- The spring and the by-pass valve in the light
Insert machine cover.
ANNOTATION
LUBRICATE THE BY-PASS VALVE.
- The blow-by reed valve with a new one
Reinstall the seal.
- Reinstall the bracket with separating plate
and the fastening screws with the given
Tighten the specified torque.
Torque guide values (N*m)
Fixing screws bracket with separator plate 0.3
÷ 0.4
- Insert the new O-ring carefully. The O-ring must not come into contact with grease and oil.
FAILURE TO FOLLOW THIS INSTRUCTION WILL RESULT IN PERMANENT DEFORMATION OF
THE O-RING.
- Attach the water pump cover and the 6
Fastening screws with the specified
tighten to a certain torque.
Torque guide values (N*m)
Pump cover fixing screws: 3 ÷ 4
AGAINST - 162
MP3 530 hpe
Advertisement
Table of Contents
