Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- The fastening nut of the flywheel magnet
Unscrew the igniter.
- The special tool, the fastening nut
and remove the washer underneath
with.
- Put the nut back on so far that the
Wave is just covered, and so that the
space previously used by the washer
remains free.
DANGER
THIS STEP IS NECESSARY BECAUSE THE MAGNETIC IGNITION IS VERY STRONG
IS BLOCKED. WHEN REMOVING THE CONICAL PART, THE ROTOR COULD FALL OUT AND THE MAGNETS COULD
BE DAMAGED.
- Apply the specified puller.
- With a 27 mm key and a 19 mm
Loosen the flywheel magneto socket.
Special tool
020467Y Flywheel puller
- Remove the puller.
- Remove the nut and the flywheel magnet
Pull out the igniter complete with starter ring.
- Remove the key from the crankshaft.
- To remove the starter ring from the freewheel
To be able to do this, it must be turned counterclockwise
rotated and removed.
Motor
AGAINST - 169
Advertisement
Table of Contents
