Table of Contents
Advertisement
Machine Translated by Google
Motor
Removing the valve control drive
- Turn the engine until the inlet valve
are closed.
- The central nut and the valve holding basket
lifting mass with the specified special mechanism
remove stuff.
Special tool
020565Y Face wrench for blocking
the alternator
- The return spring and the valve lifter mass are closed
Remove together with the stop washer.
- The markings on the crown of the vein
The timing chain and the cylinder head meet each other
align as shown in the photo.
ANNOTATION
MAKE SURE THAT THE SPRING AND WASHER DO
NOT PASS THROUGH THE CHAIN COMPARTMENT
ENGINE FALLS.
- In preparation for the next work step
must be the central screw of the chain tensioner
be solved.
- Unscrew the 2 fixing screws and
the chain tensioner together with the associated one
Remove the seal.
AGAINST - 178
MP3 530 hpe
Advertisement
Table of Contents
