Table of Contents
Advertisement
Machine Translated by Google
Motor
- Remove the shaft seal with a screwdriver
from inside the rear wheel housing
expand the drive.
- Remove the circlip shown in the illustration
distant.
- Using the specified special tool, la
ger of the shaft of the guided pulley
Remove the motor housing.
Special tool
020376Y Handle for adapter
020358Y Adapter 37 x40 mm
020364Y Guide 25 mm
Checking the rear gear shafts
- Check that the 3 waves are on the tooth surface
chen, the bearing surfaces and the shaft seal
rings are not worn or deformed.
- If abnormalities are detected, the be
Replace damaged components.
Technical specifications
Countershaft running surface diameter:
A = Ø 20 - 0,01 -0,02 mm
Technical specifications
Wheel axle tread diameter:
B = Ø 30 - 0,010 -0,023 mm
C = Ø 15 - 0,01 -0,02 mm
AGAINST - 150
MP3 530 hpe
Advertisement
Table of Contents
