Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Assembling the case
- Put the shaft seal on the housing half
Remove drive side with a screwdriver.
- Lubricate and add a new shaft seal
Install using the specified special tool.
The shaft seal must be 0.5 mm below the Ge
house surface can be used.
DANGER
INCORRECT INSTALLATION DEPTH OF THE SHAFT SEAL
AFFECTS THE CIRCULATION OF THE LUBRICANT OIL.
Special tool
020360Y Adapter 52 x 55 mm
020376Y Handle for adapter
- The seal on the housing half of the alternator
put on the inside.
- The crankshaft bearing on the housing half
Lubricate drive side.
- Put the two housing halves together
Zen. Make sure that this is the case
Crankshaft bearing on the housing half
drive side not through the threaded part of the
Crankshaft is damaged.
- The motor mount mounting screw
on the alternator side housing half
put but do not tighten yet.
Motor
AGAINST - 213
Advertisement
Table of Contents
