Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- Loosen the 4 cylinder head - cylinder fastening
screws in 2 - 3 passes in a criss-cross pattern.
- The cylinder head, the 2 centering pins, you
Remove the cable and the lower chain guide.
ANNOTATION
IF THE CENTERING PINS ARE CLAMPED TIGHTLY INTO
THEIR SEAT, THERE IS NO REMOVAL.
DANGER
A SUITABLE CONTAINER MUST BE PROVIDED FOR REMOVAL OF THE CYLINDER HEAD
BECAUSE THE CYLINDER HEAD CONTAINS COOLANT.
Removing the valves
- With the specified special tool that comes with
be equipped with the appropriate adapter
must, the half cones, spring plates, springs and the
Remove valves.
Special tool
020382Y Tool for removing the valve
Half cone equipped with part 012
020382Y012 Cylindrical spacer
(Tool for removing the valves)
DANGER
SET THE VALVES Aside SO THAT THEIR ORIGINAL INSTALLATION POSITION CAN BE
RECOGNIZED DURING LATER INSTALLATION (ALTERNATOR SIDE, DRIVE SIDE).
- The oil seals with the specified special
remove tool.
Special tool
020431Y Oil seal valve puller
Motor
AGAINST - 181
Advertisement
Table of Contents
