Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
5. Push the plug «B» onto the ignition as far as it will go
put candles;
6. Reattach the flap. Pay attention,
that the rear hook is inserted correctly.
DANGER
THE SPARK PLUGS MUST BE REMOVED WHEN THE
ENGINE IS COLD. WORKING ON THE SPARK PLUGS
ARE DESCRIBED IN THE SCHEDULED MAINTENANCE
TABLE. THE USE OF NON-COMPLIANT TAX EQUIPMENT
OR CONTROL DEVICES OR OTHER THAN THAT
SPECIFIC SPARK PLUGS CAN CAUSE SERIOUS DAMAGE
TO THE ENGINE.
ANNOTATION
THE USE OF SPARK PLUGS OTHER THAN THOSE
SPECIFIED OR OF SPLITCH CAPS THAT ARE NOT SPARK
SUPPRESSED MAY CAUSE MALFUNCTIONS IN THE
VEHICLE ELECTRICAL SYSTEM.
Gear oil
control
- Place the vehicle on level ground
Set the main stand.
- Unscrew the oil dipstick «A» with one
Clean with a clean cloth, reinsert and
screw it in completely.
- Extract the dipstick checking the oil level
is between the MAX and MIN indices; in case
where the level is below the MIN mark,
it is necessary to restore the right quantity of oil in the
hub.
- Screw the oil dipstick back in, checking that it is locked.
Suggested products
Gear oil 75W-140 Synthetic lubricant for gears
and drives.
SAE 75W-140, API GL-5
maintenance
WAR - 51
Advertisement
Table of Contents
