PIAGGIO MP3 530 hpe Service Station Manual page 211

Machine Translated by Google
Motor
- The 14 fastening screws according to the
Use the position noted when dismantling.
- Tighten the screws until they stop and
then with the prescribed torque
tighten.
- Check whether the crankshaft rotates easily
leaves.
ANNOTATION
TO ENSURE A BETTER SEAL,
ANY PROJECTING SEAL PARTS MAY NEED TO BE REMOVED
BETWEEN ENGINE HOUSING AND CYLINDER.
Torque guide values (N*m)
Motor case connecting screws 11 ÷ 13
- The thermal unit (cylinder, cylinder head, piston) as in chapter «Thermal unit and valves
Install the tilt control as described.
- Install the flywheel magneto with starter as described in the "Alternator and starter system" chapter
install writing.
- The alternator cover with the hoses of the cooling system as described in the chapter «End of the alternator
Install the lid as described.
- The complete drive pulley, the outer drive cover and the drive cover, complete
Install with line filter as described in the "Automatic transmission" chapter.
lubrication
TECHNICAL SPECIFICATIONS
Engine oil and filter change
Product
Engine oil 5W-40
AGAINST - 214
OIL PAN CAPACITY
Technical information
Revision
RECOMMENDED ENGINE OIL
Synthetic-based lubricant for
Technical information
Type
Rotor strength
Built-in games
Radial play of outer rotor
Axial play of the rotors
Description/Value
Description
The 4-Stroke Engine.
OIL PUMP
Description/Value
Wing end parts 0.05÷0.008 mm
MP3 530 hpe
1,7 Liter
1,5 Liter
Declarations
SAE 5W-40; JASO MA, MA2; API SL;
THAT A3
Trochoidal
8 mm
0,05 ÷ 0,12 mm
0,025÷0,065 mm