Table of Contents
Advertisement
Machine Translated by Google
Motor
Removing the countershaft
- Attach the special tool as shown in the illustration.
Special tool
020479Y Tool for locking the countershaft
- The nut together with the washer
remove.
- Remove the special tool and follow the instructions
laying shaft complete with drive gear
pull.
Replacing countershaft bearings
- The bearings for noise development and above
check moderate play. If necessary
change.
Housing half on alternator side
- Remove the circlip from the inside of the housing
take out the half.
AGAINST - 204
MP3 530 hpe
Advertisement
Table of Contents
