Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Removal of bearing guided belt half pulley
- Check the bushing for signs of wear and damage.
If necessary, replace the fixed guided belt half
pulley.
- Remove the locking ring using a suitable one
Remove pliers.
- With the attached in the roller bearing
Remove the ball bearing using a special tool
to drive.
ANNOTATION
IN ORDER TO NOT DAMAGE THE THREAD, THE BELT
PULLEY MUST BE PLACED ON A SUITABLE SURFACE.
Special tool
020376Y Handle for adapter
020456Y Adapter Ø 24 mm
020363Y Guide 20 mm
ANNOTATION
IF THE BEARING REVISION IS CARRIED OUT WITH A GUIDED PULLEY ASSEMBLY INSTALLED, THE
ASSEMBLY MUST BE SUPPORTED WITH THE BASKET.
Special tool
001467Y002 Basket for bearings with outer diameter Ø 73 mm
- The roller bearing with the specified special
remove tool. The straps must be there
Half disc can be supported with the basket.
Special tool
020376Y Handle for adapter
020375Y Adapter 28 x 30 mm
020364Y Guide 25 mm
001467Y002 Basket for bearings with external
diameter Ø 73 mm
Motor
AGAINST - 133
Advertisement
Table of Contents
