Table of Contents
Advertisement
Machine Translated by Google
maintenance
- The alignment of the marking on the cylinder head
check with the one on the distributor ring.
- Use a thickness gauge to check the clearance between A
Check position and valve.
Technical specifications
Valve clearance (cold)
Suction: 0.15mm
Outlet: 0.15mm
- If an incorrect value is determined, on
and bring it to the prescribed value
gen.
- Install the valve lifter cover.
- Insert the special screws with dampers.
- Fastening screws in order
1-2-3-4 with specified tightening torque
put on.
Torque guide values (N*m)
Valve cover fixing screws 7 ÷ 9 Nm (5.2 ÷ 6.6 lb*ft)
WAR - 60
MP3 530 hpe
Advertisement
Table of Contents
