PIAGGIO MP3 530 hpe Service Station Manual page 143

Machine Translated by Google
Motor
- Remove the special tool.
- Install the drive pulley axle lock
animals.
ANNOTATION
CHECK THAT THE AIR INLET AND AIR OUTLETS ARE COMPLETELY CLEAR.
- Put on the outer plastic drive cover.
- The 4 fastening screws with the indicated
tighten to the desired torque.
Torque guide values (N*m)
Noise protection cover - drive cover 7.0 ± 1.0 Nm
Rear wheel transmission
AGAINST - 146
MP3 530 hpe