Machine Translated by Google
Motor
Installation of starter motor
- Check the condition of the O-ring and this
lubricate.
- Insert the starter motor.
- The fastening screws with the ground cable
and mount the cable retaining bracket, as shown
shown in the photo.
2 screws
- The screws with the specified rotation
tighten moment.
Torque guide values (N*m)
Starter motor fixing screws 11 ÷ 13
Thermal unit and valve control
- Remove the outer and inner drive covers
with.
- The alternator cover, the flywheel
and remove the torque limiter.
AGAINST - 176
MP3 530 hpe