Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- The guide bushing, which is part of the tool
Blocking of the flywheel magneto is until
Screw it on until it stops and then turn it around
Loosen ¼ turn.
ANNOTATION
IF THIS INSTRUCTION IS NOT OBSERVED, THE
GUIDE WILL STAY ON THE FLYWHEEL.
Special tool
020472Y Key to block the light
machine
- The 2 located on the flywheel magneto
Align the holes with the openings on the housing
so that the special tool is attached
can be.
- Attach the special tool. To ensure,
that the pins fit perfectly into each other
aligned openings are inserted.
Special tool
020472Y Key to block the light
machine
- The fastening nut of the flywheel magnet
igniter with the specified torque
screw tight.
Torque guide values (N*m)
Fastening nut flywheel 115 - 125
Motor
AGAINST - 175
Advertisement
Table of Contents
