Table of Contents
Advertisement
Machine Translated by Google
Motor
- Turn the snap ring of the inner rotor until the
opening is on the joint of the oil pump shaft and can
be removed.
- Remove the wheels and thoroughly with Ben
Clean zinc and compressed air.
- The oil pump shaft complete with gear
build. The condition of the shaft and wear
check.
- Put the impellers back into the pump housing
install. The two markers must
remain visible.
- Insert the oil pump shaft with gear
Attach the snap ring and the opening on the dem
Rotate the grinding side on the opposite side.
- Check for excessive play between the oil pump shaft
and check pump housing.
- Use a blade gauge to measure the distance between the rotors
Measure the position specified (see fig
content).
Technical specifications
Max. allowable clearance:
0,012 mm
AGAINST - 222
MP3 530 hpe
Advertisement
Table of Contents
