Table of Contents
Advertisement
Machine Translated by Google
Motor
Control movable guided belt half pulley
- The contact surface with the belt on ver
check wear.
- Remove the 2 inner sealing rings and the 2 outer
O-rings.
- The inner diameter of the bushing of the movable
Measure the belt half pulley.
Technical specifications
Maximum permissible diameter:
50,05 mm
Standard diameter:
50,00 +0,035 0,00 mm
Installation of bearing guided belt half pulley
- Install a new roller bearing using the specified special tool.
ANNOTATION
INSTALL BEARING WITH LABEL AND OIL SEAL INSTALLED SO THAT THEY FACE OUTSIDE.
- In order not to damage the thread, the pulley must be placed on a suitable surface
be placed.
When working with the assembled assembly of the guided pulley, the spe
target tool can be used.
Special tool
020478Y Punch mandrel for needle sleeve
001467Y002 Basket for bearings with external
diameter Ø 73 mm
AGAINST - 134
MP3 530 hpe
Advertisement
Table of Contents
