Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Shield back
EXPANSION
- Remove the front of the shield.
- Remove the handlebar covers.
- Remove the two cushions from the back of the shield
away and pull outwards.
- The two panel mounting screws
Unscrew "A" .
- Lift panel "A" and disconnect the cable connectors
and remove it from the vehicle.
- The work for the panel on the opposite side
repeat on the following page.
- The three fasteners shown in the picture
Unscrew the connection screws on both sides.
- The cover of the back of the shield from the vehicle
remove stuff.
body
WARS - 285
Advertisement
Table of Contents
