Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- The rear brake tube back in position
bring and the appropriate fastening
Tighten screw on frame.
- Install the end piece on the exhaust manifold.
DANGER
ALWAYS REPLACE THE GRAPHITE GASKET BETWEEN THE END
PIECE AND THE EXHAUST MANIFOLD.
- Insert the three fastening screws and
Tighten with the specified torque.
Torque guide values (N*m)
Exhaust end part fastening screw 28.5 ±
1,5
- The two exhaust mounting nuts
flange with the specified torque
pull.
Torque guide values (N*m)
Fastening nut exhaust flange 17 ± 1
Engine out of the vehicle
MOT DRIVING - 123
Advertisement
Table of Contents
