Table of Contents
Advertisement
Machine Translated by Google
maintenance
REAR GAS SHOCK ADJUSTMENT
To adjust the preload of the rear
gas shock absorbers, proceed as follows:
1. The special key for the shock absorbers
Use setting, the key from below
insert and with two teeth of the threaded ring
connect.
2. Unscrew the lower threaded ring «A» until
it is a few millimeters from the upper threaded ring.
3. Turn the adjusting threaded ring «B» until the
prescribed values have been reached.
4. Pull the lower threaded ring «A» up to An
Screw on the upper threaded ring and
tighten.
Prescribed values «x»
Position 1 min. preload; driver only: 100 -
105 mm
Position 2 max. preload; Driver, passenger
and luggage: 119 mm
DANGER
DRIVING WITH THE SPRING PRELOADING NOT
PROPERLY ADJUSTED TO THE DRIVER AND
PASSENGER WEIGHT CAN IMPROVE DRIVING COMFORT
AND AFFECT DRIVING PRECISION.
WARNING
TO RISK OF INJURY (ABRASIONS).
AVOID SHOCK WHEN ADJUSTING
DAMPER PROTECTIVE GLOVES MUST BE WEAR.
WARNING
IT IS ABSOLUTELY ADVISED NOT TO USE THE INTRODUCTORY CREDITS
DIFFERENCE ON THE TWO SHOCK ABSORBERS
LIGHTLY ADJUST
WAR - 46
MP3 530 hpe
Advertisement
Table of Contents
