Clutch Pedal: Removal - Refitting - Renault Duster 2007 Manual

MECHANICAL COMPONENT CONTROLS

Clutch pedal: Removal - Refitting

LEFT-HAND DRIVE
Tightening torquesm
pedal shaft nut
a Remove the nut (4) from the pedal shaft (2) .
a Pull the shaft (2) to free the clutch pedal.
a Remove the clutch pedal (3) .
REFITTING
I - REFITTING PREPARATION OPERATION
a Coat the shaft with MOLYCOTE 33M grease (see
Vehicle: Parts and consumables for the repair)
(MR 388, 04B, Consumables - Products).
Note:
Do not hit the shaft with a hammer to get it to go
back into place.
REMOVAL
I - OPERATION FOR REMOVAL OF PART
21 Nm
CONCERNED
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the pedal shaft.
a Refit the pedal shaft nut.
a Torque tighten the pedal shaft nut (21 Nm).
a Check that the whole clutch system operates cor-
rectly.
37A-33
37A
108790