Non-Side Opening Element Mechanisms - Renault Duster 2007 Manual

NON-SIDE OPENING ELEMENT MECHANISMS

Exterior rear opening element assembly: Exploded view
Mark
1
2
3
4
5
6
7
8
9
Description
Bonnet
Front bumper
Bonnet hinge
Front wing
Side pressure piece of front
bumper
Rivet of side pressure piece of front
bumper
Front section of sill panel extender
Front wheel arch liner
Fog light
52A-2
Information
Material: Steel
(see Bonnet: Removal - Refit-
ting) (48A, Non-side opening ele-
ments).
(see Steel bodywork compo-
nent: Preparation and paint
range) (Technical Note 0592A,
Paint application range for panels).
Material: P/E
(see 5 5 A , Exterior protection,
Front bumper: Removal - Refit-
ting, page 55A-8)
(see 5 5 A , Exterior protection,
Fro n t b u m p e r a s s e m bly:
Exploded view, page 55A-1)
(see Polypropylene bodywork
component: Preparation and
paint range) (Technical Note
0592A, Paint application range for
plastic).
(see Plastic material bodywork
component: Repair) (50A, Gen-
eral information).
Material: Steel
(see Front wing: Removal - Refit-
ting) (42A, Upper front structure).
(see Steel bodywork compo-
nent: Preparation and paint
range) (Technical Note 0592A,
Paint application range for panels).
(see 56A, Exterior equipment,
Exterior body side trim assem-
bly: Exploded view, page 56A-1)
Material: P/E
(see Front fog light bulb:
Removal - Refitting) (80B Head-
lights).
52A