RADIO NO. 01 or RADIO NO. 02
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Switch off the ignition.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the radio (1) using the two.
a
WARNING
T o ensure correct operation:
- do not pinch the aerial cable,
- do not bend the aerial cable,
- do not force the aerial cable when refitting.
WARNING
T o prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
Mark the routing of the wiring behind the radio.
a Disconnect the connectors.
RADIO
Radio: Removal - Refitting
119085
REFITTING
I - REFITTING PREPARATION OPERATION
a
Note:
Ensure that the ignition is switched off.
II - REFITTING OPERATION FOR PART
CONCERNED
a Connect the various connectors.
a Fit the wiring in the position marked during removal.
a Refit the radio in its housing.
86A-3
86A