Renault Duster 2007 Manual page 946

Windscreen wiper arm: Removal - Refitting
Tightening torquesm
wiper arm nuts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Switch on the ignition.
WARNING
T o ensure that the wiper arms can travel
smoothly , the wiper motor must be initialised.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
a Mark the position of the wiper arms (3) .
a Fold back the nut covers (4) .
WIPING - WASHING
16 N.m
140941
85A-4
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the windscreen wiper arm nuts (8) .
a Remove the wiper arms using the.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Switch on the ignition.
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
a Refit:
- the wiper arms in the position marked before re-
moval,
- the wiper arm nuts.
a Torque tighten the wiper arm nuts (16 N.m).
II - FINAL OPERATION
a Fit the nut covers.
85A
140942