Renault Duster 2007 Manual page 983

Engine wiring: Removal - Refitting
K4M
AIR CONDITIONING
a Disconnect all the connectors.
a Unclip the engine wiring where indicated.
WIRING HARNESS
88A-11
a
Note:
Before removing the earth terminal, mark its
position using a indelible pencil by drawing a
line on the earth terminal and on the gearbox
casing.
When reassembling, improper positioning of the
earth terminal on the gearbox casing could result
in damage to the earth terminal or ear th wiring.
a Remove the earth terminals.
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).
a Remove the engine wiring.
88A
145232