Renault Duster 2007 Manual page 1095

UCH
Vdiag No.: 09
ALP 12
NOTES
Check the connection and condition of the connectors of the hazard warning lights control, component code 125
and the UCH, component code 645.
If the connector is faulty and there is a repair procedure (see Technical Note 6015A (Renault) or Technical Note
9804A (Dacia), Electrical wiring repair, Wiring: Precautions for repair), repair the connector, otherwise replace
the wiring.
Check for earth on the following connection:
• MAN of component 125.
If the connections are faulty and if there is a repair procedure (see Technical Note 6015A (Renault) or Technical
Note 9804A (Dacia), Electrical wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise
replace it.
AFTER REPAIR
UCH_V09_ALP12
MR-453-X79-80D000$120.mif
V1
LIGHTING
Fault finding – Fault Finding Chart
The flashing light of the hazard warning lights control button
There must be no present or stored faults.
Press the hazard warning lights control.
Check if status ET485 Hazard warning lights signal is PRESENT and the hazard
warning lights are illuminated,
If not correct, refer to the interpretation of this status.
Special note:
Use the Wiring Diagrams Technical Note for DUSTER.
Check the system operation.
does not work
80D-56
80D