Renault Duster 2007 Manual page 1033

AIR BAG AND PRETENSIONERS
Front side seat belt: Removal - Refitting
a Remove:
- the bolt (3) from the inertia reel,
- the inertia reel.
a Remove the height adjustment mechanism (de-
pending on the vehicle equipment).
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Front seat belt iner-
tia reel bolt
a Always replace the return mechanism bolts and the
lower mounting bolts of the front side seat belt.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the height adjustment mechanism (depending
on the vehicle equipment).
a Torque tighten the bolts of the height adjustment
mechanism (21 N.m).
a Refit:
- the inertia reel,
- the inertia reel bolt.
a Tighten to torque the inertia reel bolt (21 N.m).
WITH FRONT PRETENSIONER
a Refit the wiring at the front side seat belt inertia reel
in the position marked during removal
a Connect the inertia reel connector.
a Clip on the inertia reel connector safety clip.
a Refit:
- the B-pillar trim (see B-pillar trim: Removal - Re-
fitting) (71A, Body internal trim),
a
Note:
Check that the seat belt is not twisted between
the iner tia reel and the front side seat belt return
mechanism.
108519
Refit the front side seat belt return mechanism
a Torque tighten the bolt of the seat belt return
mechanism (21 N.m)
a
Note:
Check that the seat belt is not twisted between
the front side seat belt return mechanism and the
front side seat belt lower mounting.
Refit the lower mounting for the front side seat belt.
a Torque tighten the bolt of the seat belt lower
mounting (21 N.m).
a Refit:
- the cover of the seat belt upper bolt,
- the cover of the seat belt lower bolt.
88C-20
88C