Gear Control Unit: Removal - Refitting - Renault Duster 2007 Manual

MECHANICAL COMPONENT CONTROLS

Gear control unit: Removal - Refitting

JR5
Tightening torquesm
gear control unit bolts
exhaust pipe mountings
expansion bottle nuts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the expansion bottle nuts.
a Move aside the expansion bottle from its support.
K9K
a Disconnect the air duct between the turbocharger
and the intercooler at (1) .
a Remove the air duct nut (2) on the gearbox.
a Move aside the air duct.
II - REMOVAL OPERATION
21 N.m
21 N.m
8 N.m
a Unclip the gear control cables on the gearbox at (3) .
a Detach the gear control cable sleeve stops from the
gearbox by pressing at (4) .
24828
37A-50
37A
118882
109149