Hydraulic Unit - Front Left-Hand Calliper Brake Pipe: Removal - Refitting - Renault Duster 2007 Manual

FRONT AXLE COMPONENTS

Hydraulic unit - front left-hand calliper brake pipe: Removal - Refitting

ANTI-LOCK BRAKING SYSTEM
Equipment required
pedal press
Tightening torquesm
brake pipe union on the
hydraulic unit
brake pipe union on the
brake hose
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 31A, F ront axle components, Front
axle components: Precautions for the repair,
page 31A-1) .
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Position a pedal press on the brake pedal to limit
the outflow of brake fluid.
a Remove:
- the front left-hand wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) ,
- the front engine cover (if fitted to the vehicle).
14 N.m
14 N.m
a Remove the soundproofing clips (1) (if fitted to the
vehicle).
a Move the soundproofing to one side in order to see
the pipes.
II - REMOVAL OPERATION
a Undo the brake pipe union (2) on the brake hose.
a Remove the brake pipe from the retaining bracket.
a Detach the brake pipe.
31A-23
31A
117827
117816