Renault Duster 2007 Manual page 410

5th gear housing: Removal - Refitting
JR5
a Disconnect the connector (5) from the reverse gear
switch.
II - REMOVAL OPERATION
a Fit an oil recovery tray under the 5th gear housing.
a Unclip the wiring (6) of the reverse gear switch on
the 5th gear housing.
a Remove the bolts (7) from the 5th gear housing.
MANUAL GEARBOX
141720
141718
21A-19
a Remove:
- the bolt (8) of the 5th gear housing,
- the 5th gear housing,
- the seal of the 5th gear housing.
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: 5th gear housing
seal.
WARNING
Do not scrape the joint faces of the aluminium,
any damage caused to the joint face will result in
a risk of leaks.
WARNING
To ensure proper sealing, the gasket surfaces
must be clean, dry and not greasy (avoid any fin-
ger marks).
a Use SURFACE CLEANER (see ) to clean and de-
grease the joint face of:
- the 5th gear housing,
- the mechanism housing.
II - REFITTING OPERATION
a Refit the 5th gear housing equipped with a new seal.
a Torque tighten the 5th gear housing bolts (25
N.m).
21A
141719