Front Brake Calliper Mounting: Removal - Refitting - Renault Duster 2007 Manual

FRONT AXLE COMPONENTS

Front brake calliper mounting: Removal - Refitting

Tightening torquesm
front brake calliper sup-
port bolts
guide pin upper bolt
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 31A, F ront axle components, Front
axle components: Precautions for the repair,
page 31A-1) .
WARNING
In order not to damage the brake hose:
- do not tension the hose,
- do not twist the hose,
- check that there is no contact with the surrounding
components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Unlock the steering column.
a Remove:
- the front wheel on the side in question (see 35A,
Wheels and tyres, Wheel: Removal - Refitting,
page 35A-1) ,
- the front brake pads (see 31A, Front axle compo-
nents, Front brake pads: Removal - Refitting,
page 31A-3) .
105 N.m
34 N.m
a Remove the guide pin upper bolt (1) while holding
the nut (2) .
a Suspend the front brake calliper from the suspen-
sion spring.
II - REMOVAL OPERATION
a Remove:
- the two front brake calliper mounting bolts (3) ,
- the front brake calliper mounting.
31A-11
31A
119218
119219