Renault Duster 2007 Manual page 352

Exhaust: Precautions for the repair
Before cutting the exhaust system, draw a line (D) be-
tween the two marks (P1) and (P2) .
The distance between the two marks on the exhaust
pipe is (X1) : 80 mm.
3 - Operate tool Mot. 1199-01
EXHAUST
Fit the (Mot. 1199-01) (1) on the exhaust pipe.
Tighten the two bolts on the tool until they touch the
pipe in order to clamp the tool onto the pipe.
Turn the cutting tool using the handle and pressing it
100649
against the pipe (as indicated in the diagram above).
Tighten the two bolts on the tool whilst cutting, until the
pipe is completely cut.
Note:
Do not over-tighten the tool onto the pipe to avoid
deforming it.
Once the pipe is cut, file and deburr the end of the pipe
to be used on the vehicle again.
4 - Positioning the exhaust sleeve
WARNING
Do not reuse an old exhaust sleeve.
14747
19B-7
19B
102118