Renault Duster 2007 Manual page 480

FRONT AXLE COMPONENTS
Hydraulic unit - master cylinder brake pipe: Removal - Refitting
ANTI-LOCK BRAKING SYSTEM
a Undo the brake pipe unions (3) on the master cylin-
der.
a Remove the brake pipes between the hydraulic unit
and master cylinder.
REFITTING
I - REFITTING OPERATION
a Refit the brake pipes between the hydraulic unit and
master cylinder.
a Clip the brake pipes onto the bulkhead.
a Screw on:
- the brake pipe unions on the hydraulic unit,
- the brake pipe unions on the master cylinder.
a Torque tighten:
- the brake pipe unions on the hydraulic unit (14
N.m),
- the brake pipe unions on the master cylinder
(14 N.m).
II - FINAL OPERATION
a Refit:
- the soundproofing on the bulkhead (if fitted to the
vehicle),
- the soundproofing mounting clips,
- the front engine cover (if fitted to the vehicle).
a Remove the pedal press.
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
117829
31A-20
31A