Renault Duster 2007 Manual page 435

Front left-hand driveshaft gaiter, gearbox side: Removal - Refitting
JR5
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Front left-hand
driveshaft gaiter, gearbox side.
a parts always to be replaced: gearbox side front
driveshaft seal locking ring.
a Always replace:
- the cup,
- the cup spring,
- the big securing clip,
- the small securing clip.
a Use a parts washer to clean the driveshaft, the spi-
der and the driveshaft yoke sleeve.
II - REFITTING OPERATION
a Fit the small tightening clip (2) to the driveshaft.
a Lightly lubricate the driveshaft using the GREASE
supplied with the gaiter to facilitate its fitting.
DRIVESHAFTS
128412
29A-18
a Refit the gaiter (3) onto the driveshaft.
a Insert the gaiter lip into the groove of the driveshaft.
a Refit:
- the spider (6) in the position marked during remov-
al,
- a new lock ring using circlip pliers.
29A
128409
109410