Master Cylinder: Removal - Refitting - Renault Duster 2007 Manual

MECHANICAL COMPONENT CONTROLS

Master cylinder: Removal - Refitting

LEFT-HAND DRIVE
Tightening torquesm
nuts on the brake servo
rigid brake pipe unions
on the master cylinder
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the front engine cover (if fitted to the vehi-
cle).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the expansion bottle nuts (1) .
a Move aside the expansion bottle, without emptying
it.
II - REMOVAL OPERATION
WITHOUT ANTI-LOCK BRAKING SYSTEM
21 N.m
14 N.m
a Remove the rigid brake pipe unions at (2) and mark
their position.
116643
37A-2
37A
108344