Renault Duster 2007 Manual page 595

MECHANICAL COMPONENT CONTROLS
Brake servo: Removal - Refitting
LEFT-HAND DRIVE
a Remove the special nuts (4) for the insulating foam.
a Gently move the insulating foam aside.
a Remove:
- the brake servo nuts (3) , on the passenger com-
partment side (the nuts mounting the pedal mount-
ing to the servo),
- the brake servo.
REFITTING
I - REFITTING PREPARATION OPERATION
109449
a Check that the brake servo seal (5) is present; re-
place the seal if it is faulty.
a parts always to be replaced: Connecting shaft
between the brake pedal and the brake servo
pushrod.
a Before refitting, check the following dimension (X1)
= 144.5 mm ± ± ± ± 0.5.
37A-12
37A
109206
91101