Alternator Pulley: Removal - Refitting - Renault Duster 2007 Manual

Alternator pulley: Removal - Refitting

K4M
Equipment required
pneumatic or electric wrench
torque wrench
open-ended spanner for torque wrench
Tightening torquesm
alternator pulley
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) .
a Disconnect the battery (see Battery: Removal - Re-
fitting) .
a Remove:
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-2) ,
- the alternator (see 16A, Starting - Charging, Al-
ternator: Removal - Refitting, page 16A-1) .
II - REMOVAL OPERATION FOR ALTERNATOR
PULLEY
a Unclip the alternator pulley protector (if equipped).
a Place the alternator in a vice jaw.
STARTING - CHARGING
80 N.m
110266
16A-12
16A