Renault Duster 2007 Manual page 953

Rear screen wiper arm: Removal - Refitting
REAR SCREEN WIPER
Special tooling required
Ele. 1781 Tool for removing windscreen
wiper arms
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Switch on the ignition.
WARNING
T o ensure that the wiper arms can travel
smoothly , the wiper motor must be initialised.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
a Mark the position of the wiper arm.
II - REMOVAL OPERATION
a Pull down the nut cover (5) .
a Remove the nut (6) from the wiper arm.
a Remove the wiper arm using the (Ele. 1781).
a Remove the rear screen wiper blade (see Rear
screen wiper blade: Removal - Refitting) .
WIPING - WASHING
145588
85A-11
REFITTING
I - REFITTING PREPARATION OPERATION
a Switch on the ignition.
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.
a Turn the wiper stalk from (0) to (1), and then from (1)
to (0).
a Switch off the ignition.
II - REFITTING OPERATION
a Refit the rear screen wiper blade.
a Refit:
- the wiper arm,
- the wiper arm nut.
a Fit the nut cover.
85A