Rigid Brake Pipe: Repair - Renault Duster 2007 Manual

Equipment required
compressed air nozzle
Tightening torquesm
brake pipe bolts
u n d e r b o d y u n i o n s
(female/male)
This procedure applies to copper pipes diameter 4.7
mm.
Note:
This procedure does not apply to:
- hybrid pipes (pipe + hose),
- pipes with diameters 6 mm and 8 mm.
REPAIR
I - PIPE PREPARATION OPERATION
a
WARNING
T o avoid causing a breakdown in hydraulic brake
circuit , do not squash or bend the rigid pipe
when cutting.
a Cut the pipe to the recommended length using a
tube cutter (see Garage equipment catalogue).
GENERAL INFORMATION

Rigid brake pipe: Repair

8 N.m
6 N.m
a Put the nuts or bolts on the pipe before forming the
rivets.
II - MAKING THE RIVETS
a
Note:
To make the rivets, fit the rivet press in a vice.
30A-7
30A
128666
128643
128665