Renault Duster 2007 Manual page 495

FRONT AXLE COMPONENTS
Front shock absorber and spring: Removal - Refitting
a Remove the shock absorber rod with a male Allen
key and a ring spanner.
a Separate the various components which make up
the « spring/shock absorber » assembly.
REFITTING
I - REFITTING PREPARATION OPERATION
a
Note:
When removing or refitting springs, you must not
strike the springs, as this could damage their sur-
face treatments.
a If necessary, replace any faulty filter unit compo-
nents (see 31A, Front axle components, Filter
unit assembly: Removal - Refitting, page 31A-38)
.
a parts always to be replaced: front shock absorb-
er rod nut
a parts always to be replaced: Filter unit assembly
a parts always to be replaced: front anti-roll bar
tie-rod nut
a parts always to be replaced: front shock absorb-
er lower nut
II - REFITTING OPERATION
117228
a Place the spring compressor in a vice.
Note:
When replacing the spring for easier fitting,
ensure that the positioning and orientation of the
spring and the tool cups are correct.
31A-35
31A
95435