Renault Duster 2007 Manual page 482

FRONT AXLE COMPONENTS
Hydraulic unit - underbody union brake pipe: Removal - Refitting
ANTI-LOCK BRAKING SYSTEM
a Remove the two bulkhead soundproofing clips (3) .
a Move aside the soundproofing to reveal the under-
body pipe unions.
a Detach the brake pipes from their clips (4) .
a Unscrew the pipe unions (5) on the hydraulic unit.
a Remove the brake pipes between the hydraulic unit
and underbody unions.
REFITTING
I - REFITTING OPERATION
a Refit the brake pipes between the hydraulic unit and
underbody unions.
a Screw on:
- the brake pipe unions on the hydraulic unit,
- the brake pipe unions on the underbody unions.
a Torque tighten:
- the brake pipe unions on the hydraulic unit (14
N.m),
- the brake pipe unions on the underbody unions
(14 N.m).
II - FINAL OPERATION
a Fit the bulkhead soundproofing.
a Refit:
- the soundproofing mounting clips (if fitted to the ve-
hicle),
- the front engine cover (if fitted to the vehicle).
a Remove the pedal press.
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
118339
145740
31A-22
31A