Fault Finding - Introduction - Renault Duster 2007 Manual

UCH
Vdiag No.: 09
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding method applicable to all computers with the following specifications:
Vehicle(s): DUSTER
Function concerned: LIGHTING
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this document):
– Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
– Visu-Schéma.
Type of diagnostic tools
– CLIP
Special tooling required
If the information obtained by the fault finding tool requires the electrical continuity to be checked, connect
bornier Elé. 1622 or universal bornier Elé. 1681.
WARNING:
– All tests with bornier Elé. 1622 or Elé. 1681 must be conducted with the battery disconnected.
– The bornier is only designed to be used with a multimeter. Never power the test points with 12 V.
UCH_V09_PRELI
MR-453-X79-80D000$010.mif
V1
LIGHTING
Fault finding – Introduction
Special tooling required:
Elé. 1622
Elé. 1681
Name of computer:UCH
Vdiag No.: 09
Diagnostic tool
Multimeter
Bornier
Universal bornier
80D-2
80D