Renault Duster 2007 Manual page 1116

UCH
Vdiag No.: 09
KEY ALLOCATION PROCEDURE
WARNING:
If none of the keys are available, it will be necessary to carry out a reallocation procedure for all keys.
Establish dialogue with the UCH computer.
In the menu Special commands, validate the command SC015 Key allocation.
Key programming is split into 2 parts:
1. Key insertion stage.
2. Key allocation.
IMPORTANT:
Keys which are not presented will no longer be active and will not be able to be used in the key allocation stage.
Restart the procedure to reallocate them.
Switch off the ignition and click on Next.
Ensure that you have all the vehicle's keys. Keys not inserted during this procedure will not work.
IMPORTANT:
Only 2 blank keys are authorised via the key allocation procedure.
Switch on the ignition and insert the key to be allocated.
Switch off the ignition.
The tool asks "Register another key?".
To allocate additional keys, switch on the ignition for several seconds with the other vehicle keys to be allocated
(three maximum) and then validate.
After each additional key allocation, switch off the ignition.
The tool displays "Vehicle VIN".
Enter the vehicle VIN.
Enter the programming key below into Code Management with the vehicle VIN.
MR-453-X79-82D000$060.mif
V1
ACCESS – SAFETY
Fault finding – Programming
82D-16
82D