Renault Duster 2007 Manual page 1052

UCH
Vdiag No.: 09
ET083
CONTINUED
Check the operation of the indicator lighting stalk in the left-hand indicator position:
Check the continuity between connections 64T and MAM.
Disconnect the left-hand indicator connector from the UCH.
Check the insulation, continuity, and the absence of interference resistance on the following connections:
• 64T between components 209 and 645.
• MAM between component 209 and earth.
If the connections are faulty and if there is a repair procedure (see Technical Note 6015A (Renault) or Technical
Note 9804A (Dacia), Electrical wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise
replace it.
If the earth and the connections are correct, replace the lighting stalk, component code 209 (see MR 451
Mechanical, 84A, Controls - Signals, Signals lighting switch: Removal - Refitting).
If the fault is still present, contact the Techline.
AFTER REPAIR
MR-453-X79-80D000$080.mif
V1
LIGHTING
Fault finding – Interpretation of statuses
Carry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
80D-13
80D