Renault Duster 2007 Manual page 500

FRONT AXLE COMPONENTS
Front driveshaft lower arm: Removal - Refitting
a Remove:
- the lower arm front and rear bolts (8) ,
- the lower arm.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Front driveshaft
lower arm bolt
a Always replace the lower arm nuts.
a Position the heads of the lower arm bolts so that
they face the rear of the vehicle.
II - REFITTING OPERATION
a Refit:
- the lower arm,
- the lower arm ball joint in its housing.
a Torque tighten:
- the front and rear bolts mounting the lower arm
on the subframe (180 N.m),
- the lower arm ball joint nut (62 N.m).
III - FINAL OPERATION
a Refit:
- the front wheel arch side liner,
- the front wheel on the side in question (see 35A,
Wheels and tyres, Wheel: Removal - Refitting,
page 35A-1) .
a Check the values of the axle assemblies (see Front
axle assembly: Adjustment values) .
145810
31A-40
31A