MECHANICAL COMPONENT CONTROLS
Accelerator pedal cable: Removal - Refitting
K4M, and 4X2 TRANSMISSION
REMOVAL
I - REMOVAL PREPARATION OPERATION
RIGHT-HAND DRIVE
a Remove the brake fluid reservoir (see 37A, Me-
chanical component controls, Master cylinder:
Removal - Refitting, page 37A-2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
LEFT-HAND DRIVE
a Disconnect the accelerator pedal cable at (1) .
RIGHT-HAND DRIVE
a Extract the clip (2) from the accelerator cable on the
pedal.
a Push the accelerator cable sheath stop into the en-
gine compartment.
122818
37A-24
37A
121585