Injector Holder Shim: Removal - Refitting - Renault Duster 2007 Manual

Injector holder shim: Removal - Refitting

K4M
Tightening torquesm
injector holder shim
bolts (7) and (8)
injector holder shim
bolts 9 to 16
upper timing cover bolt
suspended mounting
bolt
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the inlet distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-12) ,
- the injector rail (see 17B, Petrol injection, Injec-
tor rail - Injectors: Removal - Refitting, page
17B-10) ,
- the multifunction support (see 10A, Engine and
cylinder block assembly, Multifunction sup-
port: Removal - Refitting, page 10A-48) .
FUEL MIXTURE
25 N.m
21 N.m
41 N.m
62N.m
12A-14
a Remove:
- the bolt (1) of the suspended mounting on the injec-
tor holder shim,
- the bolt (2) mounting the upper timing cover on the
injector holder shim.
II - REMOVAL OPERATION
a Remove:
- the bolts (3) from the injector holder shim,
- the injector holder shim.
12A
116567
101792