Renault Duster 2007 Manual page 806

NOTES
Computer
Injection
MR-453-X79-62C000$060.mif
V1
CLIMATE CONTROL
Fault finding – Conformity check
Only carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine at idle speed, AIR CONDITIONING OPERATING
(air conditioning compressor engaged).
SUB-FUNCTION: HEATING (CONTINUED)
Parameter or Status
Checked or Action
ET112: Passenger
compartment heating
resistor cut-off
Display and notes
YES or NO
Note: Depending on the
requirements of the
injection system (power
requirement, torque
reduction, etc.), the
injection computer sets
the controlled
passenger compartment
heating resistor stage
number (no more, no
less)
62C-31
62C
Fault finding
In the event of a fault, refer
to the interpretation of
this status.