Renault Duster 2007 Manual page 333

Engine cooling fan assembly: Removal - Refitting
K9K
AIR CONDITIONING
a Disconnect:
- the engine cooling fan assembly connector (9) ,
- the engine cooling fan assembly resistor connector
(10) .
a Unclip the engine cooling fan assembly wiring.
a Move aside the wiring of the engine cooling fan as-
sembly.
a Remove the engine cooling radiator bolts (8) .
COOLING
a Unclip the « condenser - expansion valve » connect-
ing pipe at (11) .
145563
a Pull the fan assembly according to the arrows (12)
passing it under the « condenser - expansion
valve » connecting pipe.
a
a Remove the engine cooling fan assembly from
above the vehicle.
In the event of replacement
a Remove from the fan assembly:
- the power-assisted steering hose clips,
- the wiring clip,
- the support of the intercooler duct and coolant hose
19A-32
WARNING
In order to avoid any refrigerant leaks, do not
damage (deform, twist, etc.) the pipe.
Note:
Do not damage the cooling unit vanes (radiator,
condenser, etc.) during handling.
on the fan assembly.
19A
144817