Renault Duster 2007 Manual page 604

MECHANICAL COMPONENT CONTROLS
Accelerator pedal: Removal - Refitting
K4M, and 4X2 TRANSMISSION
Tightening torquesm
pedal mounting nuts
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
LEFT-HAND DRIVE
a Undo the special nut (1) for the insulating foam on
the left-hand nut of the accelerator pedal mounting.
a Remove:
- the nuts (2) of the accelerator pedal mounting,
- the mounting - accelerator pedal assembly.
21 N.m
a Remove:
- the accelerator cable on the pedal side by holding
it upwards and sliding the end piece of the cable to-
wards the centre console,
- the circlip (3) using a screwdriver,
Note:
Note the fitting direction of the shaft in relation to
the pedal mounting.
a Remove:
109450
- the pedal shaft,
- the accelerator pedal.
37A-21
37A
108918